The Embersafe fire extinguisher is especially useful in prescribed burning and the establishment of firebreaks or any fire situations where embers need to be put out effectively. The refillable tank uses an innovative air pouch system to regulate pressure inside the tank ensuring a continuous stable high pressure flow at all times.

Filling the system is as easy as connecting the hose to a garden tap and turning off the valve when full. This is extremely advantageous over other existing fire extinguishers that need to be refilled with professional equipment. The Embersafe allows for unhindered patrolling around a property enabling you to quickly dowse any threatening embers before they can ignite larger fires. As the unit is powered off water pressure no pumping is required by the user, which allows for immediate use after filling. The Embersafe provides a surprising amount of spraying from a single refill from the simple garden tap and is also useful for watering and washing down which is a great way to keep familiar with the equipment through-out the year.

What is an ember attack?
An ember attack is when the burning parts of trees such as twigs, branches or leaves become temporarily airborne during a bushfire. These embers are the primary cause of spot fires, which contribute to the contin-ued spread of a bushfire. Embers can ignite combustible materials outside the home such as a doormat or garden plants. If left to burn, they may ignite parts of the house and eventually cause the entire house to burn down. Property owners often underestimate the danger of an ember attack even after the bushfire has passed.
If embers are not extinguished they can also lodge themselves within firefighting equipment, clothing and vehicles. The Ember Attacker is an effective way to protect your home by extinguishing embers after they land.

Basic specifications:
Normal fill is 9L depending on Mains pressure
Recharge by attaching hose to garden tap
Fills in less than 2 minutes with moat mains and rural pump pressures
No dismantling required to fill
Padded shoulder straps
Durable delivery hose with inline tap
Brass snap back garden type fitting for connection to tap and nozzle
Hand trigger and adjustable nozzle
Fully empties without pumping
Pressurized by mains water pressure
Weighs 14kg full
Discharge distance up to 8 m
Majority discharge between 4 to 6 m
Discharge time over 2 minutes

No pumping required.
Pressurised by water mains pressure when connected to garden tap.
Cannot be overfilled. Higher mains pressure means larger fill quantity (see specs).
Brass pressure fittings.
Premium quality fully adjustable jet-spray nozzle.
An ergonomic harness made to hiking pack & breathing apparatus specifications so the weight is taken on the legs and not the shoulders, this reduces fatigue and strain injury. The cylinder is firmly anchored to the back with an adjustable lumbar pad to suit different height wearers. The harness body contact points are made of breathable material with full adjustable straps with quality fasteners.
A narrow cylinder to reduce “sloshing” when moving over difficult terrain.
The pressure envelope is electronically tested during manufacture, and does not have to be disturbed during the life of the unit. Every steel cylinder is polyester powder coated and tested to 2500KPa.

Benefits and cost saving features

• Easy Cleaning – Coating allows hose to be simply wiped clean after use
• Easy to repair
• Abrasion resistance – Coating enhances abrasion resistance and increase the life of the hose
• Increased resistance to chemicals and oils – PVC/Nitrile coating gives improved protection against oil and chemical contamination
• Light & flexible – The new generation Firecheck is lighter, and has a smaller coil diameter than the conventional latex lined hose
• Available in long lengths on request
• SABS 1456 Part 4 approved

Specifications:

Mass without hose: 7.87kg

Mass with hose: 19.4kg

Disc diameter: 575mm

Height (Bracket): 575mm

Wall protection: Cabinet

Wall projection: 290mm

Hose: SANS 1086 PVC

Hose dimension: ID 20mm x 30m

Valve: 25mm BSP CP

Length of jet *: 10m @ 0.2Mpa

Discharge rate ** (std = 300kPa): 30lt/min @300kPa

Key Advantages:

• Rapid fire control with minimum of clean up.
• Suitable for use where access is limited.
• Easily operated by one person.

Suitable for the following type of fires:

• Petrol, Diesel, Oils
• Computers, Switchgear, Fax  

Key Advantages:

• Rapid fire control with minimum of clean up.
• Suitable for use where access is limited.
• Easily operated by one person.

Suitable for the following type of fires:

• Petrol, Diesel, Oils
• Computers, Switchgear, Fax  

A trolley unit need to be strong and dependable. Our fire extinguisher trolleys are constructed with steel and epoxy powder coating paint to prevent corrosion. The trolleys are supplied with brackets to securely fasten fire extinguishers. Designed to protect large industrial and marine risks, wheeled mobile units can be supplied in a choice of sizes and with an extinguishing agent to suit the specific risk.

Key Advantages:
Fast knockdown, efficient discharge.
Highly manoeuvrable well balanced units
Easily operated by one person
Suitable for a variety of firefighting powders
Easy-to-operate

Specifications:
Height of cylinder: 795mm
Diameter of cylinder: 250mm
Mass empty: 14kg
Mass full: 39kg
Charge: 25kg
Effective range: ≥7m
Discharge time: ≥15s
Discharge nozzle: Hose & Pistol
Working pressure: 1400kPa
Propellant: Nitrogen

2×9 Twin cabinets are manufactured in-house by highly skilled artisans, using only SABS approved polyester resin and materials. Our range is benchmarked at the top of static asset protection and fire protection solutions. Safety equipment in fire fighting is of the utmost importance to us, and our fire cabinets are in high demand right across Africa.

more ...